EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is often a remarkably productive solar controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technology, it guarantees optimized Vitality conversion and method security for a wide array of photovoltaic (PV) applications.
Important Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller know-how for top-quality photo voltaic Electrical power harvesting. Vital options include:
Multiphase Synchronous Rectification (MSR) for enhanced Vitality conversion.
Superior MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, short circuits, and reverse polarity.
Step-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are included: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Confirm the design quantity and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Choose a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Retain appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Often comply with correct safety protocols and make sure the technique is powered off before connecting factors.
Action 1: Connect the battery terminals to your cost controller (good to positive, detrimental to adverse).
Stage two: Hook up the solar panel array into the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Step four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Electric power within the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, light Command.
5. Monitoring and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software such as Photo voltaic Station PC.
Distant monitoring can be done Together with the EPEVER WiFi module.
6. Troubleshooting Widespread Concerns
Problem one: No Energy Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Difficulty 2: About-Voltage Protection
Validate the More info solar array’s voltage ranking.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings during the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification know-how assures:
Bigger Efficiency: Minimized Power losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Constant and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Remarkable choice for optimizing solar power era and increasing battery lifestyle. By pursuing the above mentioned setup information, buyers can make sure greatest performance and system longevity.